Civil Structures

This one-of-a-kind structure was designed to meet the demands of the Pacific Coast environment including high winds, a corrosive environment, and O...
MCE provided full design services for this project. The original building was a combination of three separate buildings that were constructed at va...
Leading to the Troutdale Outlet Mall, this highway bridge overpass used a unique design that met the client's needs. MCE was able to design the bri...
MCE provided analysis and design of the 40' long x 28' wide, single span, two-lane bridge. The design included pile foundation, concrete pile ...
MCE provided a lateral analysis and design in accordance with AASHTO requirements for the single-span bridge for the abutment and wing walls. The b...
The existing logs that formed this footbridge were determined to be structurally inadequate and within a year the footbridge would be closed. MCE d...
As part of a design-build team MCE designed a new head wall, wing walls, and an outflow structure at River Ponds Section 206. MCE designed two gate...
MCE performed a preliminary structural feasibility analysis and site investigative services. The purpose of the 10 mile route feasibility analysis ...
The Fairview Lake Outlet Structure is a low-head concrete dam installed to provide flood protection and hydraulic control over the Fairview Lake. M...
MCE performed a seismic evaluation and field surveys of treatment buildings and equipment as well as a seismic analysis of treatment facilities, re...
MCE provided the preliminary engineering for a 36 foot cable-stayed jib crane capable of carrying a 10,000 pound lift. This jib crane is used as pa...
Designed at every location to ensure the safety of the general public and the Port staff, MCE prepared structural calculations and details of the h...
This project consisted of structural evaluation and repair of an existing dock for support of a 45 ton rotating gantry crane. The existing structur...
Miller Consulting Engineers provided structural engineering services for the replacement of the main spillway gates for the 435 foot long diversion...
As Prime Consultant in a multi-year project, MCE studied the upper Wallowa River immediately downstream of the lake and adjacent to the town of Jos...
MCE provided a structural peer review and analysis of a 1 million gallon water tank foundation with strengthening recommendations. During construct...

Pages

GET IN TOUCH WITH US:

GSA Schedule GS10F105AA
SBA Certified Small Business Enterprise (#P0669937)

Contact form:

Full-Time Structural Designer
Miller Consulting Engineers, Inc. is a well-established structural engineering firm located in Portland, Oregon, and is looking for entry-level designers with one or more years of experience. We provide diversified structural engineering services to a wide variety of clients and design with timber, concrete, masonry, composite, and steel. Consulting is a fast-paced business and last year we completed over 1,000 projects. We offer competitive salaries based on experience, are a family-oriented firm, maintain reasonable work hours, and have a great work environment. 
 
A bachelor’s degree in civil/structural engineering is required. Entry level engineers will have the opportunity to work on a wide variety of projects including commercial, industrial, residential, towers, retaining walls, specialty structures, seismic analysis/retrofit, and historical restoration of structures. If you are looking for this kind of work environment with diversified structural engineering, please contact us.
 
Full-Time Structural Engineer

Miller Consulting Engineers, Inc. is a well-established structural engineering firm located in Portland, Oregon, and is looking for an experienced engineer with four or more years of experience. We provide diversified structural engineering services to a wide variety of clients and design with timber, concrete, masonry, steel, and composites. Our Consulting firm is a fast-paced business and last year we completed over 1,000 projects. We offer competitive salaries based on experience, are a family-oriented firm, maintain reasonable work hours, and have a great work environment.
 
For experienced engineers, a bachelor’s degree in civil/structural engineering and a professional engineering license are required (or the ability to take the exam). Our engineers have the opportunity to work on a wide variety of projects including commercial, industrial, residential, towers, retaining walls, specialty structures, seismic analysis/retrofit, and historical restoration of structures. If you are looking for this kind of work environment with diversified structural engineering, please contact us.
 
You may submit your cover letter and resume in the "Upload Resume" section, found below. 

 
1 Start 2 Complete